Stainless Steels in Dentistry and Orthodontics

Stainless Steel In Dentistry

Write briefly on stainless steel.
Answer:

Steel is an iron-based alloy that consists of less than 1.2% carbon. When 12 to 25% of chromium is added to steel, the alloy is known as stainless steel.

Types of Stainless Steel:

Based on the different crystalloid configurations of the structure, stainless steel is of three types, i.e.

1. Ferritic
2. Martensitic
3. Austenitic

“Understanding stainless steels through FAQs: Composition, properties, and uses explained”

“Importance of studying stainless steels for dental professionals: Questions explained”

1. Ferritic of  Stainless Steel:
   • Pure iron at room temperature has a body-centered cubic (BCC) structure and is referred to as ferrite which is stable up to 912°C.
   • Ferric alloys have good corrosion resistance, but less strength and hardness. So they fid little application in dentistry.
2. Martensitic Stainless Steel
   • When austenite (face-centered cubic structure) is cooled very rapidly (quenched), it will undergo a spontaneous, diffusionless transformation to a body—centered tetragonal (BCT) structure called martensite.
   • This is a highly distorted and strained lattice that results in a very hard and strong but brittle alloy.
   • The corrosion resistance of the martensitic stainless steel is less than that of the other types.
   • Because of their high strength and hardness, martensitic stainless steels are used for surgical and cutting instruments. Bur shanks are also made from this steel.

“Common challenges in mastering stainless steel knowledge effectively: FAQs provided”

1. • Advantages of  Stainless Steel:
     • Its heat treatment can be done.
     • Due to its high strength and hardness, it is used for making surgical as well as cutting instruments, bur shanks, and orthodontic pliers.
   • Disadvantages of  Stainless Steel:
     • Bitterness is very high owing to a distorted and strained lattice structure.
     • It has less corrosion resistance as compared to other types.
2. Austenite  Stainless Steel:
   
   • 18-8 stainless steel was introduced by Dr. WH Hatfield in 1924. At temperatures between 912°C and 1394°C, the stable form of iron is an FCC structure called austenite.
   • Austenitic stainless steel alloys are the most corrosion-resistant of stainless steel.
   • This alloy is also called 18-8 stainless steel based on the percentage of nickel and chromium in its composition.
   • Uses: These are used most commonly in orthodontics and pedodontics in the form of bands and wires.

Composition of  Austenite Stainless Steel:

“Factors influencing success with stainless steel selection: Q&A”

Advantages of Austenite  Stainless Steel:

• It withstands the occlusal forces because of its high stiffness.
• It has high ductility and malleability, so it is easily drawn into wires or hammered into stainless steel sheets.
• Cold working can be done easily with 18-8 stainless steel without the risk of fracture. This increases the strength of the metal.
• The formability of 18-8 stainless steel is good. Due to this many small stainless steel wires are twisted or braided together to form multi-stranded arch wires.
• Due to its corrosion resistant it is stable in an oral environment.
• It resists distortion so tipping and torquing can easily be done by brackets.
• The presence of smooth surface stainless steel brackets leads to less friction which makes orthodontic treatment faster and more comfortable.
• 18-8 stainless steel is biocompatible
• 18-8 stainless steel is economical.

Disadvantages of  Austenite Stainless Steel:

• It has a low spring back as compared to nickel–titanium alloys which make it a poor initial alignment archwire.
• Due to its high stiffness more frequent activations are required.
• It can lead to discomfort to the patient as it delivers more force compared to the wires made of other alloys of the same diameter.
• In this soldering is needed, if the temperature becomes more than 500°C the corrosion resistance of the alloy is decreased.

“Steps to explain composition of stainless steels: Iron vs chromium vs nickel: Q&A guide”

Uses of  Austenite Stainless steel:

Various stainless steel alloys are used for manufacturing:

• Bracket and buccal tubes
• Archwires
• Bands
• Ligature wires
• Attchments
• Springs
• Microimplants
• Wires for removable appliances
• For manufacturing orthodontic instruments and pliers.